Projects

Sitzmark-Bar-and-grill

Sitzmark Bar & Grill

Location: Girdwood, Alaska

In 2012 BELL provided laser scanning services to Z-Architects to scan the inside of the Sitzmark Bar Grill located in Girdwood, Alaska. This purpose of this project was accurately dimension the ceiling area for placement of sound panels. The main issues were that the ceiling was high (accessible by scaffolding only), irregularly shaped, and had various lighting and piping hanging from it. The dimensions and conflicts of the various sections were identified using the laser scan data allowing the panels to be pre-fabricated so that the scaffolding only had to be erected for installation, thereby minimizing the disturbance to the restaurant.

  , , , , ,
BELL engineering and survey Gallo Center

Gallo Center

Location: Anchorage

The project involved developing a 3.63 acre parcel for the construction of a 47,161 s.f. multi-use commercial building with parking lot. The building phase consisted of retail suites and mechanical room on the first floor and two offices on the second floor. BELL provided topographic and as-built survey, civil engineering design, permitting and construction assistance. Engineering design drawings were prepared to meet current Municipality of Anchorage (MOA) standards and design criteria. BELL prepared the civil site plan, grading and drainage plan, erosion control plan, and design of utility service lines and storm water system. Type 3 Storm Water Pollution Prevention Plan (SWPPP) was also prepared for this project.

  , , , , ,

Gathering Center 1 (GC1) Wet Gas Project

Location: Prudhoe Bay, Alaska

In 2015 BELL provided 3D scanning services for 19 complete modules and the associated exterior interconnected piping located at the GC1 facility. This effort was completed to help BP engineers in the projects initial planning phase as well as their sub-contractors in the final design phase. The goal of this project was to have a completed design in place before the next facility turnaround (TAR) to remove and replace the wet-gas piping throughout the facility. BELL laser scanned all the modules associated with project, tied all of the gathered laser scan data to the local plant control network and provided a complete ACAD model of all of the elements within each module including, but not limited to; structural steel, piping down to ½” diameter, electrical boxes and conduit runs, HVAC, instrumentation, and architectural features sertraline anxiety.

  , , , , ,
Baker-Hughes

Baker Hughes Production Facility

Location: Deadhorse, Alaska

BELL provided civil, land surveying, mechanical, and plumbing design for this 93,700 SF production facility. Design included hydronic heat and gas fired boilers, ventilation for shop areas and office spaces, and self-contained water storage with drain/fill hookups coordinated with the local service providers requirements.

  , , , , ,

Hilcorp Master Agreement

Location: North Slope, Alaska

BELL has had maintained a stable and continuous presence on Alaska’s North Slope for more than 37 years.

Our team recognizes how important the oil & gas industry is for Alaska’s economy and ultimately, Alaskan residents.

BELL provides surveying, civil engineering, and 3D laser scanning for Hilcorp (previously BPXA), which involves standard daily practices including supervising field and office personnel in various surveying tasks for all pads, roadways, pipeline routes, and site facilities. We also provide quality control services for installed earthen and concrete materials and civil engineering support for the design of new and/or improved sites throughout the oil patch. In summary, we are in charge of the coordination and technical oversight of civil engineering, surveying, and quality assurance in pipeline and facility construction projects.

  , , , , ,